Hello Alex,
Thanks for your reply .Now I understood the concept.Now I'm able to ping
server addresses from robot aliases and vice versa .
So I've started base test(no proxy test) , ERROR results as follows .
that is on client(polyclt) shows
00.16| created PolyMix-4-rbt [47 / 06013f77.73ee037b:00000452] on 10.1.0.24
000.16| created PolyMix-4-rbt [48 / 06013f77.73ee037b:00000454] on 10.1.0.24
000.16| created PolyMix-4-rbt [49 / 06013f77.73ee037b:00000456] on 10.1.0.25
000.16| created PolyMix-4-rbt [50 / 06013f77.73ee037b:00000458] on 10.1.0.25
000.16| created 50 agents total
000.16| fyi: current state (1) stored
000.16| fyi: working set size goal: first 51840 fill objects of the test
000.16| fyi: max local population size: 50 robots
000.16| fyi: reached max local population size: 50 robots
000.24| i-fexit 0 0.00 -1 -1.00 0 43
000.24| DnsXact.cc:83: error: 1/1 (c63) timedout waiting for DNServer
response
000.24| 10.1.0.11 failed to lookup w1040.h1129o1001s1010.bench.tst:8080
after 1
attempts; last req id: 1
000.24| DnsXact.cc:83: error: 2/2 (c63) timedout waiting for DNServer
response
000.24| 10.1.0.10 failed to lookup w1137.h1128o1001s1010.bench.tst:8080
after 1
attempts; last req id: 2
I'm using polyclt, polyser and dns machines as seperate m/c .
On dns m/c , I've followed steps as given in howto(5.2)section .
It has created for only for server .i.e on bench.tst files 10.1.128.1
to10.1.
130.5(bench id is " 1" ,10.1.129-131.1-250) . what abt 10.1.0-3.1-250 ?
sorry for my english .
TIA .plz help me .
how to create dns.and how the output should be?
Regards,
-shadha
----- Original Message -----
From: "Alex Rousskov" <rousskov@measurement-factory.com>
To: "shadha" <shadhanker@yahoo.com>
Cc: <users@web-polygraph.org>
Sent: Tuesday, February 05, 2002 9:07 PM
Subject: Re: polymix-4 routing
> On Tue, 5 Feb 2002, shadha wrote:
>
> > You are correct, I'm talking abt the script in PolyMix-4 HOWTO
document[1]
> > only . I'm using polyser and polyclt machines.
> > while creating routes using script ,it creates routes to " iface
eth0,not
> > for lo" , i've attched script result below...for u'r reference.
>
> As far as I can tell, the routes look correct. The kernel has to use
> "eht0" interface to get to the IP aliases on "lo" (e.g., 10.1.152.0)
> via known "routing" addresses (e.g., 172.16.1.197).
>
> Can you ping server addresses from robot aliases and vice versa? What
> seems to not work?
>
> Alex.
>
> > [root@transquid workloads]# /sbin/route |more
> > Kernel IP routing table
> > Destination Gateway Genmask Flags Metric Ref
Use
> > Iface
> > 172.16.1.116 * 255.255.255.255 UH 0 0 0
eth0
> > 172.16.1.0 * 255.255.255.0 U 0 0 0
eth0
> > 10.1.28.0 172.16.1.68 255.255.252.0 UG 0 0 0
eth0
> > 10.1.92.0 172.16.1.84 255.255.252.0 UG 0 0 0
eth0
> > 10.1.152.0 172.16.1.197 255.255.252.0 UG 0 0 0
eth0
> > 10.1.216.0 172.16.1.213 255.255.252.0 UG 0 0 0
eth0
> > 10.1.24.0 172.16.1.67 255.255.252.0 UG 0 0 0
eth0
> > 10.1.88.0 172.16.1.83 255.255.252.0 UG 0 0 0
eth0
> > 10.1.156.0 172.16.1.198 255.255.252.0 UG 0 0 0
eth0
> > 10.1.220.0 172.16.1.214 255.255.252.0 UG 0 0 0
eth0
> > 10.1.20.0 172.16.1.66 255.255.252.0 UG 0 0 0
eth0
> > 10.1.84.0 172.16.1.82 255.255.252.0 UG 0 0 0
eth0
> > 10.1.144.0 172.16.1.195 255.255.252.0 UG 0 0 0
eth0
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
This archive was generated by hypermail 2b29 : Mon Feb 06 2006 - 12:00:21 MST