Hi
I am seeting up a ploymix-3 workload.
I have two linux redhat 7.1 machines with 128MB RAM each
I am setting up a routed config, where the polyserver would be in a
differenet subnet than the client and the cache device.
My cache device is in the same subnet, and is configured as a transparent
cache using wccp v2
My questions:
When I run pmix3-ips.pl to verify the ips to configure, it reports ips to be
used as 10.1.1-1.1.75 to configure using aka on my client.
However 10.1.1.1 is the ip of my cache, (as per docuemnt 'how to run polymix
3 from measurement-factory.com), and if I configure 10.1.1.1 also on my
client machine, the setup would never work since there would be an ip
conflict.
For a routed config with a transparent cache do I need to change additional
parameters. Can I change the ip of my cache to say 10.1.1.252 (since
10.1.1.253 is the ip of my gateway to the server network) or is 10.1.1.1 (or
x.x.x.1) hard-coded somewhere as the ip for the cache box.
Thanks
Mark
This archive was generated by hypermail 2b29 : Tue Jul 10 2001 - 12:00:20 MDT