On Fri, 6 Apr 2001 Sadhna.Ahuja@nokia.com wrote:
> Hi,
> I have just installed Polygraph 2.5.4 and tried running simple.pg.
> The server side starts fine. But when I start the client side, I see
> messages like the following:
>
> Connection.cc: 102: (1/1) No buffer space available
> Connection.cc: 102: (3/3) No buffer space available
> Connection.cc: 102: (17/17) No buffer space available
>
> Any suggestions about what I should do?
What OS are you using? Have you patched your OS to support high
request levels? For FreeBSD tuning instructions, please go to
http://www.measurement-factory.com/docs/FreeBSD/
You see, simple.pg uses "best-effort" request rate and can generate
1000 req/sec or more, depending on your OS and hardware. A general
purpose OS will choke on high request rates unless tuned.
You can modify simple.pg to produce a given request rate (add
appropriate req_rate field to Robot settings), but if you plan to use
the same OS for high-performance testing, you will have to tune the
kernel.
Good luck,
Alex.
This archive was generated by hypermail 2b29 : Tue Jul 10 2001 - 12:00:18 MDT