On Thu, 15 Mar 2001, alex shin wrote:
> Hi, everyone
> I've tested polygraph 2.5.4 with webaxe-1.pg but i'm getting confused of client and server IP address.
> Below is my testing environment.
>
> ------------ --------------- ------------
> | Client Host |------| Network Switch |--------| Server Host |
> | 10.1.1.1 | | | | 10.1.1.2 |
> ------------ --------------- ------------
> |
> |
> --------------------
> | Squid Reverse Proxy |
> | 10.1.1.4 |
> --------------------
>
> webaxe-1.pg configuration is
> addr[] rbt_ips = ['10.1.1.1'];
> addr[] srv_ips = ['10.1.1.2:80'];
>
> Client side Command is
> polyclt --config webaxe-1.pg --proxy 10.1.1.4:80 --log /tmp/client.log --verb_lvl 5
>
> Server side Command is
> polysrv --config webaxe-1.pg --log /tmp/server.log --verb_lvl 5
>
> Please, read my attached webaxe-1.pg file and if there is a mistake, answer me a solution.
The addresses looks correct to me.
Are you having problems with Polygraph?
Duane W.
This archive was generated by hypermail 2b29 : Tue Jul 10 2001 - 12:00:18 MDT